跳到主要内容Skip to main content
Viewing & Inspection · Oct 26, 2026 · 12 min read
📖 Selling

Price Cut, Credit, Repairs or Holdback? An Ontario Seller’s Options After the Buyer’s Home Inspection

What a buyer can ask for after the inspection, and what each answer costs you, is partly settled by the inspection clause you accept on offer night.

Arthur Zhao · Broker · AZ Real Estate Partners · 2026-10-26
Quick Answer

What happens to my deal if the buyer’s home inspection turns up problems?

One of three things: the sale closes on the terms already signed, it closes on amended terms you and the buyer both sign (a lower price, a credit, repairs, or a holdback), or it ends with the buyer’s deposit returned in full. Which of these the buyer can bring about without your agreement is decided by the wording of the inspection condition and whether its deadline has passed; under OREA’s general clause INSP-1, if the buyer does not give written notice by the deadline that the condition is fulfilled, the offer becomes null and void.

Source: OREA Residential and Commercial Clauses, INSP-1 and INSP-4 (January 1, 2026 edition); OREA Form 100 and Form 120 (2026)

I’m Arthur Zhao, a Toronto real estate Broker.

Picture offer night. You have three offers on the table, and the one with the strongest number carries a home inspection condition. Before you sign it back, a fair question is: if the inspector finds something, what is this buyer going to come back asking for, and what am I allowed to say?

It’s tempting to treat that as a problem for later. It isn’t. The answer is partly written into the condition you are about to accept. Below, I walk through it by the three things you are trying to protect: the deal itself, the money you walk away with, and your workload and risk between now and closing.

Offer review: you accept, sign back or amend the inspection clause

→

Inspection: the buyer’s inspector reports to the buyer

→

Request: the buyer asks for a price cut, credit, repairs or holdback, or says nothing

→

Paper: anything you agree to goes into a signed amendment (OREA Form 120)

→

Before closing: repairs, re-inspection and holdback release, if any were agreed

First thing to protect: the deal itself

Start with who can end the deal, and until when. In OREA’s general inspection clause, INSP-1, the offer is conditional on the buyer obtaining a report satisfactory to the buyer “in the Buyer’s sole and absolute discretion.” If the buyer does not give written notice by the stated deadline that the condition is fulfilled, the offer becomes null and void and the deposit is returned to the buyer in full without deduction. The condition is for the buyer’s benefit, and the buyer may waive it in writing within the same period.

Read that from the seller’s chair. While that deadline is still running, a request for a price cut arrives with a fallback attached: if you decline and the buyer is not satisfied, the buyer can let the condition lapse. Saying no is your right, but under that wording the cost of saying no can be the deal.

Once the buyer has waived or confirmed the condition in writing, the picture changes. Nothing in OREA Form 100 obliges a seller to reopen price or terms after the agreement is firm; any change from that point is something both sides choose to sign. That is a reading of the standard form, not of your specific contract. Added clauses supersede the pre-printed text where they conflict (Form 100, section 26), so have your lawyer read the agreement you actually signed.

Two smaller points belong here. If the buyer asks for more time to get quotes, Form 100 section 20 makes time of the essence and allows deadlines to be extended or shortened only by an agreement in writing signed by the seller and buyer, or by their lawyers if authorized. And if your agreement includes OREA’s INSP-12, a buyer whose condition is not fulfilled or waived must give you a true copy of the inspection report and related estimates before the deposit is returned.

💡 My own read: the leverage you have after the inspection is bought, or given away, on offer night, when you accept a particular inspection clause. INSP-1 makes the buyer’s satisfaction the entire test and says nothing about a seller’s chance to fix things. INSP-4 (“Seller Allowed to Remedy”) writes a repair route into the condition itself: a report revealing deficiencies the seller is willing and able to remedy in a good workmanlike manner, together with the buyer’s right to have the inspector return and be satisfied with a secondary inspection of the fix. INSP-3 takes another approach, tying the condition to deficiencies that can be remedied at a cost not greater than an amount filled in on the offer. None of these removes the buyer’s written-notice deadline, and how the parts of INSP-4 work together in a dispute is a question for a lawyer. But if being allowed to repair rather than discount matters to you, the time to ask for that wording is when you sign back the offer, not after the report arrives. OREA itself describes its clauses as guidance, not required wording.

Second thing to protect: what you walk away with

A price reduction, a closing credit and a holdback can each be the same dollar figure on paper and still land differently.

Price reduction. The purchase price in the agreement goes down, so your proceeds go down by that amount. According to Ontario’s Land Transfer Tax Act, s.1(1), the “value of the consideration” the tax is calculated on includes the gross sale price, so a lower agreed price means a lower base for the buyer’s land transfer tax. That tax is the buyer’s: under s.2.2 the person who acquires the beneficial interest is the one liable. It doesn’t change what you owe, but it can be part of why a buyer prefers a price cut.

Closing credit. The price stays, and an amount is credited to the buyer on closing. Your proceeds drop by the credit. Whether a credit reduces the “value of the consideration” for land transfer tax is not addressed directly in the Act; that is for the two lawyers to work out under the statute’s definition, and I won’t guess at it here.

Holdback. Part of your sale proceeds is held back after closing until something agreed happens, such as a repair being finished. No statute sets the rules for this; it is entirely a matter of written agreement between buyer and seller. The amount, who holds it, what triggers its release, and what happens if the work is not done all need to be spelled out, because nothing fills those gaps for you.

One more check on your own side: if your listing agreement calculates commission on the sale price, see how an amended price is treated there before you choose between a price cut and a credit. That is your listing agreement’s wording, not a rule in the Act.

⚠️A holdback has no default rules. No statute decides who holds the money, when it is released, or what happens if the repair is not finished. If the amendment does not say, there is nothing to fall back on but a disagreement.

Two kinds of settlement

Fixed amount (price cut or closing credit)
Performance obligation (repair first, or holdback)
What you give up
A known dollar figure, written into the amendment
Your time, a contractor’s work, and, with a holdback, use of part of your proceeds until release
When it is finished
When the amendment is signed; the number is settled
When the work is done and accepted, which may be after closing in the holdback case
What can still go wrong
Little on this issue once signed; the price or credit is fixed
Work runs late, the buyer is not satisfied with a re-inspection, or the parties disagree on whether release was triggered
Who judges the result
No one; the amount is the result
Whatever standard you wrote in, such as “good workmanlike manner” or a buyer re-inspection
What the paper must say
The new price, or the credit amount
Scope of work, deadline, who holds any holdback, release trigger, and what happens if the work is not done
💡 A fixed amount costs more on paper but closes the issue the day you sign. A performance obligation can cost less, but you carry the work and the uncertainty until closing or beyond, so it only works if the written terms are specific.

Third thing to protect: your workload and risk before closing

If you agree to repair before closing, you are taking on a project with a deadline and a reviewer. Under INSP-4 wording, the buyer has the right to have the inspector return and to be satisfied with a secondary inspection of the fix. If your agreement also includes INSP-15, the buyer may inspect the property one further time before completion on written notice. Plan the repair schedule around those visits, not just the closing date.

Then put it in writing. Form 100 section 26 says the agreement is the entire agreement and that no representation, warranty, collateral agreement or condition affects it other than as expressed in it. A promise made in a phone call or a text to fix the furnace sits outside that agreement. The OREA form for changing a signed agreement is Form 120, Amendment to Agreement of Purchase and Sale: it identifies the original agreement by date and property, sets out what is deleted and what is inserted, carries an irrevocable deadline after which an unaccepted amendment is null and void, and has a line for a seller’s spouse to consent where that is needed.

Use the Insert section to describe the work specifically: what is being repaired, to what standard, by when, who does it, and what evidence the buyer receives. Vague wording here is how a small repair turns into a closing-day dispute.

Seller checklist by stage

Each group matches a point in the deal where a different decision is open.

When you accept the offer
  • ☐Read which inspection clause is in the offer: INSP-1, INSP-4, INSP-3 or something custom
  • ☐Decide whether you want a repair route written in, and sign back with that wording if you do
  • ☐Check the condition deadline is a specific date and time
  • ☐Check whether INSP-12 (copy of the report if the deal ends) and INSP-15 (one further inspection before completion) are included
When the buyer’s request arrives
  • ☐Confirm whether the condition deadline has passed and whether the buyer has waived or confirmed it in writing
  • ☐Ask for the specific items and any written estimates behind the request
  • ☐Sort the request into a fixed amount (price or credit) or a performance obligation (repair or holdback)
  • ☐Ask your lawyer how a price change versus a closing credit is handled on closing
  • ☐Check how your listing agreement calculates commission on an amended price
Before you sign the Form 120
  • ☐Confirm the Delete and Insert sections match exactly what was agreed
  • ☐For repairs, write the scope, standard, deadline and proof of completion
  • ☐For a holdback, write the amount, who holds it, the release trigger and what happens if the work is not done
  • ☐Note the irrevocable deadline on the amendment
  • ☐Have your spouse sign the consent line if spousal consent is needed
  • ☐Send the signed amendment to your lawyer
Sources

Frequently Asked Questions

Q

Which inspection clause should I accept if I’d rather fix problems than lower the price?

A

OREA’s INSP-4 (“Seller Allowed to Remedy”) is the version that refers to deficiencies the seller is willing and able to remedy in a good workmanlike manner, and gives the buyer a right to a secondary inspection of the fix. The general clause INSP-1 leaves the outcome to the buyer’s sole and absolute discretion. The clause has to be agreed when the offer is accepted, so raise it in your sign-back.

Q

Can the buyer cancel just because I won’t lower the price?

A

If the inspection condition is still open and worded like OREA’s INSP-1, the buyer does not have to give notice that it is fulfilled; without that notice by the deadline, the offer becomes null and void and the deposit is returned in full. After the buyer has waived or confirmed the condition in writing, the standard Form 100 contains no clause obliging you to reopen price. Your own agreement may differ, so have your lawyer check it.

Q

Is a holdback safer for me than a price cut?

A

Not automatically. A price cut is a fixed number settled when you sign the amendment; a holdback keeps part of your proceeds tied up until an agreed condition is met. No statute sets holdback terms, so the amount, the holder, the release trigger and the fallback if the work isn’t done all have to be written in.

Q

Does lowering the price change the land transfer tax?

A

Under the Land Transfer Tax Act, s.1(1), the tax base includes the gross sale price, so a lower agreed price lowers the base for the buyer’s land transfer tax; the buyer, not the seller, is liable for that tax under s.2.2. Whether a closing credit has the same effect is not addressed directly in the Act, so the lawyers handle it on closing.


Discover more from GTA Real Estate Broker | Arthur Zhao

Subscribe to get the latest posts sent to your email.

Continue reading

相关文章Related articles

您好!想了解房产买卖、投资、贷款?随时问我。 点这里开聊 →
Arthur Zhao

AZ 房产 AI 顾问

Arthur Zhao · Real Estate Broker

选个话题快速开始
Powered by AZ Real Estate Partners · 对话用于改进服务